| Management number | 229725395 | Release Date | 2026/05/31 | List Price | US$12.00 | Model Number | 229725395 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
WHEEL ADAPTERS (Changes Bolt Pattern) - Vehicle Must Be 5x135 AND Wheels Must Be 5x5.5" (5x139.7). IMPORTANT: Make Sure you measure bolt pattern correctly. See the images for a diagram on how to do this correctly. [ SPECIFICATIONS ] Quantity: Two (2) Thickness: 1.5" (38mm) Vehicle Side Bolt Pattern: 5x135 Wheel Side Bolt Pattern: 5x5.5" (5x139.7) Centerbore: 87.1mm Stud/Nut Thread Pitch: 14x2 Material: T6 Aerospace Grade Aluminum [ FITMENTS ] Compatible with Ford 2000-2002 Expedition, 2000-2003 F-150 Compatible with Lincoln 1998-2002 Navigator, 2002-2003 Blackwood WARNING: READ BEFORE PURCHASE/INSTALLATION - IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATH - Check and re-torque all nuts within 25-50 miles of installation - A torque wrench is required. Don't use air or impact wrenches - We recommend purchasing hubcentric rings to center the spacers onto your hub and reduce chance of vibrations - These spacers don't have a lip, therefore your wheels must be lugcentric - If your vehicle's wheel studs are longer than 1.5" (38mm), the back of your wheels need pockets to accommodate the stud/nuts - If your vehicle doesn't come with 14x2 threaded studs, additional hardware will be required - Measure wheel gap for clearance. You'll need at least 1.5" (38mm) of clearance to prevent wheel/tire from touching the fender
| ASIN | B01BEI7L4Y |
|---|---|
| Size | 38mm (1.5") Thick |
| Color | silver |
| Brand Name | RockTrix |
| Unit Count | 2.0 Count |
| Item Weight | 8.9 Pounds |
| Manufacturer | RockTrix |
| Item Diameter | 1.5 Inches |
| Material Type | Aluminum |
| Exterior Finish | Machined |
| Pitch Circle Diameter | 135 Millimeters |
| Manufacturer Part Number | 38mm-5135>5139.7-87.1-14x2 |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form